Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
  • 2019 Conference on Lasers and Electro-Optics Europe and European Quantum Electronics Conference
  • OSA Technical Digest (Optica Publishing Group, 2019),
  • paper ce_7_6

Long length/small core step-index silicon core fiber fabricated by improved powder-in-tube process

Not Accessible

Your library or personal account may give you access

Abstract

The development of silicon-core fibers have drawn strong interest over the last decade. Indeed, silicon is a material offering interesting properties such as mid-wave infrared transparency (1-7 µm), high refractive index (3.48 @ 1.55 µm) and large third order non linearity (≈ 1.5×10−13 cm²/W). Until now, three fabrication processes have been developed to achieve glass-clad silicon-core fibers: the high-pressure microfluidic chemical deposition method [1], the molten core method from silicon rods [2] and the powder-in-tube method [3]. This last one shows a very high potential to achieve hybrid optical fibers as it allows not only to use a wide range of materials but it is also compatible with the stack-and-draw process ; in this way, many different designs of fibers can be especially drawn. Unfortunately, fibers fabricated by this method are very short, only a few centimetres long because of the mechanical stresses accumulation at the interface between the two materials which have different thermal expansion coefficients (Si: 3×10−6 K−1; SiO2 : 5×10−7 K−1), and because of the presence of air between the grains.

© 2019 IEEE

PDF Article
More Like This
Fabrication and performance of long lengths of silica core fiber

K. Ciemiecki Nelson, D. L. Brownlow, Leonard G. Cohen, F. V. Dimarcello, R. G. Huff, J. T. Krause, W. A. Reed, D. S. Shenk, E. A. Sigety, J. R. Simpson, and K. L. Walker
WH1 Optical Fiber Communication Conference (OFC) 1985

Fabrication and Characteristics of Cr-Doped Fibers Employing Powder-in-Tube Technique

Yi-Chung Huang, Jau-Sheng Wang, Kuei-Ming Chu, Ting-Chien Lin, Wei-Lun Wang, Ta-Lung Chou, Szu-Ming Yeh, Sheng-Lung Huang, and Wood-Hi Cheng
OWS1 Optical Fiber Communication Conference (OFC) 2011

Modified rod-in-tube method for low- loss step-index optical fiber

A. Utsumi, T. Sagawa, T. Shintani, R. Kobayashi, and T. Sugawa
WF1 Optical Fiber Communication Conference (OFC) 1979

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved