Building A Better World: A Real World Application of Optical Technology

Amy B. Newbury

JM1A.1 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Tailored Shearing Interferometry Using Geometric Phase.

Luis A. Alemán-Castañeda, Bruno Piccirillo, Lorenzo Marrucci, Enrico Santamato, and Miguel A. Alonso

JT3B.1 Optical Fabrication and Testing (OF&T) 2019 View: PDF

A New Family of Freeform Telescope Types

David R. Shafer

JT3B.2 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Freeform Aspheric Version of the Offner1.0X Relay

David R. Shafer and Luc Gilles

JT3B.3 Optical Fabrication and Testing (OF&T) 2019 View: PDF

The optical design and fabrication of a wide-field 2-mirror unobscured freeform imaging telescope

Xianglong Mao, Yongjun Xie, Jinpeng Li, Rong Gao, and Wei Zhao

JT5A.1 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Onion-ring bokeh simulation by Nagata patch ray-tracing

Shinya KANEKO, Shinya MORITA, and Yutaka YAMAGATA

JT5A.10 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Observations on Ductile Laser Assisted Diamond Turning of Tungsten Carbide

Di Kang, Jayesh Navare, Yang Su, Dmytro Zaytsev, Deepak Ravindra, and Hossein Shahinian

JT5A.11 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Detection and Quantification of Surface Defects in Silicon during Diamond Turning

Neha Khatri, Suman Tewary, Harry Garg, Vinod Karar, and R.K. Sinha

JT5A.12 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Freeform Surface Measurement with Experimental Ray Tracing – Refraction vs. Reflection

T. Binkele, D. Hilbig, M. Essameldin, T. Henning, and F. Fleischmann

JT5A.13 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Implementing Hartmann type null screens to test cemented doublet lenses

M. C. López-Bautista, M. Avendaño-Alejo, and G. Castillo-Santiago

JT5A.14 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Measuring temperature-dependent refractive index coefficient (dn/dT) of the IR Chalcogenide glass in LWIR using a Twyman-Green Interferometer

Robert Y. Chou, Greg Schmidt, and Duncan T. Moore

JT5A.15 Optical Fabrication and Testing (OF&T) 2019 View: PDF

All-inorganic Y3Al5O12:Ce3+, Mn2+ Phosphor-in-Glass for Warm W-LED

Hang Lin and Yuansheng Wang

JT5A.16 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Polymer polishing, Polypropylene and Polytetrafluoroethylene lenses for a Terahertz application

R. Izazaga, V. Lopez-Cortez, J. Arriaga-Petrona, Y.A. Garcia-Jomaso, J.M. Arroyo-Hernandez, J.A. De la Luz-Portilla, and M. Hernandez-Rios

JT5A.17 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Advanced confocal microscopy for rapid nanoscale topography of surfaces

Chi-Sheng Hsieh, Guan-Yu Zhuo, and Ming-Che Chan

JT5A.18 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Direct Measurement of Phase-related Parameters of Narrow-linewidth Lasers based on 120-degree Phase Difference Interferometer

Xi Zhang, Fei Yang, Zitong Feng, Jiejun Zhao, Fang Wei, Haiwen Cai, and Ronghui Qu

JT5A.19 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Fast design method of smooth freeform lens with an arbitrary aperture for collimated beam shaping

Xianglong Mao, Yongjun Xie, Jinpeng Li, and Wei Zhao

JT5A.2 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Optimizing Contact Area Geometry and Taper Composition in Microknot Resonators

Alexandra Blank and Yoav Linzon

JT5A.20 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Towards Versatile Folded Microfibers: Folded Versus Straight Configuration on Hydrophilic and Hydrophobic Substrates

Alexandra Blank, Moti Fridman, and Yoav Linzon

JT5A.21 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Processing technology of magnetorheological finishing for large-aperture optical components

Jing Hou, Xianhua Chen, Jie Li, Zhong Bo, and Wenhui Deng

JT5A.22 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Fabrication of Optics with a Thin Part by Plasma Chemical Vaporization Machining

Hideo Takino, Kazuya Yamamura, Yasuhisa Sano, and Yuzo Mori

JT5A.23 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Nanofabrication using transmitted and diffracted light manipulated by gap spacing

Taeyeon Kim, Heesang Ahn, Hyerin Song, Jong-ryul Choi, and Kyujung Kim

JT5A.24 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Implementing null phase screens to test fast singlet lenses

I. Velázquez-Gómez, A. Sánchez-Montes, M. Avendaño-Alejo, and J. DelOlmo-Márquez

JT5A.25 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Numerical simulation of axial misalignment and tilt of the spatial modulator rays used in the deflectometry

Diana Castán-Ricaño, Fermín Granados-Agustín, Andrea Muñoz-Potosi, Gabriel Valdivieso-González, Elizabeth Percino-Zacarias, Maximino Avendaño-Alejo, and Alejandro Cornejo-Rodríguez

JT5A.26 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Fabrication of Modified Double Half Wave Band-Pass Filter Using Alternately Stacked TiO2-SiO2 Multilayer

Mukesh Kumar, Neelam Kumari, Amit L. Sharma, Vinod Karar, and R K Sinha

JT5A.30 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Intracochlear vibration measurement using supercontinuum multifrequency-swept optical coherence microscope

Samuel Choi, Fumiaki Nin, Takeru Ota, and Hiroshi Hibino

JT5A.32 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Properties of Complex Shaped SiO2 Glass Lens by New Manufacturing Method

Tomohisa Komiya, Kiyoaki Shinohara, Takuya Miyazaki, Yusuke Chiba, and Hiroshi Ida

JT5A.4 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Design of a two-mirror telescope using a free-form surface whose conic constant of the secondary mirror is variable with respect to the height of the incident ray

J. J. Alvarado Martínez, F. Granados Agustín, S. Vázquez Y Montiel, M. E. Percino Zacarías, and A. Cornejo Rodríguez

JT5A.5 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Early Identification of Patterning Errors in the Fabrication Process of Diffraction Gratings

Sofia C. Corzo-Garcia and Ulf Griesmann

JT5A.7 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Gradient Optics DLL (GODLL) Generator

Simon Tsaoussis and Hossein Alisafaee

JT5A.8 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Recycle loop deployed for the large optical components of Megajoule laser

P. Cormont, C. Houee, B. Da Costa Fernandes, M. Pfiffer, and D. Taroux

JT5A.9 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Fabrication, metrology and alignment challenges for freeform imaging systems

Ulrike Fuchs

JW1A.1 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Design and Manufacturing Considerations for Freeform Optical Surfaces

Steve Powers, Matthew Brunelle, and Matt Novak

JW1A.2 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Importance of Accurate Datums in Freeform Manufacturing

Franciscus Wolfs and Scott DeFisher

JW1A.3 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Precision Glass Molding of Freeform Optics

Dustin Gurganus, Spencer Novak, Alan Symmons, and Matthew A. Davies

JW1A.4 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Manufacturing High-Gradient Freeform Continuous Phase Plates (CPPs) using Magnetorheological Finishing

Joseph A. Menapace, Aaron S. Peer, and Gary C. Tham

JW1A.5 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Fabrication and Measurement of Large Scale Freeform Optics

Dae Wook Kim, Isaac Trumper, Logan Graves, Maham Aftab, Heejoo Choi, Brian Kellermeyer, Lei Huang, Andrew E. Lowman, and Chang Jin Oh

JW1A.6 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Aligning Freeform Surfaces with Deflectometry

Angela Davies, Trent Vann, Christopher Evans, and Mark Butkiewicz

JW2A.1 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Absolute freeform surface measurement using interferometry

Gregory Frisch and Thomas Hordin

JW2A.2 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Independent In-process Figure Convergence Metrology for Freeform Optics

Nick Horvath, Todd Noste, Matt Davies, and Chris Evans

JW2A.3 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Metrology techniques for ultra-precision diamond turned freeform optics

Dali R. Burada, Kamal K. Pant, Vinod Mishra, Ashish Dwivedi, Lalit M. Pant, Gufran S. Khan, and Chandra Shakher

JW2A.4 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Null-Screen design for freeform surface testing

Daniel Aguirre-Aguirre, Brenda Villalobos-Mendoza, Rufino Díaz-Uribe, and Manuel Campos-García

JW2A.5 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Design of a Flexible On-Axis Interferometric Null Test for Off-Axis Parabolic and Toroidal Mirrors

Romita Chaudhuri and Jannick P. Rolland

JW2A.6 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Development of a Convex Surface Measurement Using Prescription Retrieval

Aaron M. Michalko and James R. Fienup

JW2A.7 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Design-for-manufacture of high-resolution 3D printed rotation optics

Ingo Sieber, Daniel Moser, and Ulrich Gengenbach

JW3A.2 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Evaluation of a 3D printed freeform reflector and lens

Andre Sigel, Mike Dohmen, and Andreas Heinrich

JW3A.3 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Pushing Freeform Optical Manufacturing: Fabricating Optimax’s Largest Freeform Component

Matt Brunelle, Ian Ferralli, Jen Coniglio, Tim Lynch, Todd Blalock, and Jessica DeGroote Nelson

JW3A.4 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Replication of a polymer surface plasmon resonance freeform optical element

Michael Vervaeke, Jürgen Van Erps, Jens De Pelsmaeker, Heidi Ottevaere, and Hugo Thienpont

JW3A.5 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Slanted Fast Tool Enables Efficient Freeform Machining for Infrared Applications

Frank Niehaus, Stephan Huttenhuis, and Daniel Gauch

JW3A.6 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Quadratic extension to retrace error calibration algorithm for non-null interferometric surface figure testing of nominally flat reflective surfaces

Martin Tangari Larrategui, Yanqi Zhang, Andrew D. Rocha, Thomas G. Brown, and Jonathan D. Ellis

JW3A.7 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Design for Manufacturing: Tolerancing and Optimization

Brian J. Bauman and Michael D. Schneider

OM2A.1 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Modeling interferometric measurement error of small radius parts with a phase-shifting Fizeau using the y-y bar diagram

Reem Alsalamah and Patrick J. Reardon

OM2A.2 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Realistic optical drawing specifications from a metrology point of view

Bruce Truax

OM2A.3 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Testing and Characterization of Challenging Optics and Optical Systems with Shack Hartmann Wavefront Sensors

Rémy Juvénal, Guillaume Dovillaire, and Philippe Clemenceau

OM2A.4 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Modern optics drawings: Understanding the nuances of ISO 10110 drawings

Eric Herman, David M. Aikens, and Richard N. Youngworth

OM2A.5 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Suppressing surface low and mid-spatial frequency errors of large optics during full-aperture rapid polishing

Ruiqing Xie, Shijie Zhao, Defeng Liao, Xianhua Chen, Jian Wang, Qiao Xu, Xinxing Ban, Huiying Zhao, and Zhuangde Jiang

OM3A.2 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Manufacturing ELT optics: Year 2 report

Rémi BOURGOIS and Roland GEYL

OM3A.3 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Alignment and Testing of Large Lenses using Computer Generated Holograms

J. H. Burge, A. Mihill, W. Pullen, Z. Walker, C. Zhao, and M. Valente

OM3A.4 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Interferometric Metrology for the TMT Primary Mirror Segments: Design and Analysis

J. Beverage, J. H. Burge, J. Blanchard, B. Lewis, C. Zhao, and M. Valente

OM3A.5 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Introduction of Chemical Mechanical Planarization for Semiconductor Device Manufacturing

Sidney Huey

OM4A.1 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Observations on the effect of retrace error in scanning white light interferometry of smooth optical surfaces

Clark Hovis, Hossein Shahinian, and Chris Evans

OM4A.2 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Spectrally controlled interferometry for improved radius of curvature measurement

Chase Salsbury and Artur G. Olszak

OM4A.3 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Holographic fabrication of graded photonic super-crystals using spatial light modulator

Yuankun Lin, David Lowell, and Safaa Hassan

OM4A.4 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Specification of Optical Surfaces with Anisotropic Mid-Spatial Frequency Errors

Hamidreza Aryan and Thomas J. Suleski

OM4A.5 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Advancements in Ion Beam Figuring

Thomas Arnold, Jens Bauer, and Fred Pietag

OM4A.6 Optical Fabrication and Testing (OF&T) 2019 View: PDF

PSD on the Shop Floor: Controlling MSF Errors and Keeping CCP Machines Honest

Brandon Dube

OT1A.1 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Non-Directional Modulation Transfer Function for Optical Surfaces with Anisotropic Mid-Spatial Frequency Errors

Hamidreza Aryan and Thomas J. Suleski

OT1A.2 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Predictive models for grinding & polishing of various optical materials

Tayyab Suratwala, Rusty Steele, Lana Wong, Phil Miller, Joel Destino, Eyal Feigenbaum, Nan Shen, Nathan Ray, and Michael Feit

OT1A.3 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Germanium Polishing via Femtosecond Laser Radiation

L. L. Taylor, J. Xu, T. R. Smith, M. Pomerantz, J. C. Lambropoulos, and J. Qiao

OT1A.4 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Micro Laser Assisted Machining (µ-LAM) of Precision Optics

Hossein Shahinian, Dmytro Zaytsev, Jayesh Navare, Yang Su, Di Kang, and Deepak Ravindra

OT1A.5 Optical Fabrication and Testing (OF&T) 2019 View: PDF

A Technique to Control Global Figure Using Acid Immersion and Zernike Decomposition

Andrew Nelson

OT1A.6 Optical Fabrication and Testing (OF&T) 2019 View: PDF

R2R-UV-nanoimprinting as a powerful mean for large-area fabrication of freeform micro-optical elements

Barbara Stadlober, Claude Leiner, Dieter Nees, Anja Haase, Ursula Palfinger, Ladislav Kuna, Stephan Ruttloff, Martin Smolka, Jan Hesse, Max Sonnleitner, and Christian Sommer

OT1A.7 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Cordierite Design, Manufacturing, and Performance

S. Nagata, Y. Nakahori, S. Mukai, J. Estrada, A. Shobe, M. Kamiura, and Y. Ikeda

OT2A.1 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Nanocomposites – A Route to better and smaller optical Elements?

Daniel Werdehausen, Sven Burger, Isabelle Staude, Thomas Pertsch, and Manuel Decker

OT2A.2 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Glass Printing for Optics and Photonics Applications using a Filament-Fed Laser-Heated Process

Nicholas Capps, Jason Johnson, Jonathan Goldstein, and Edward Kinzel

OT2A.3 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Hybrid metasurface-refractive lenses

Wei Ting Chen, Yousef Ibrahim, Alexander Y. Zhu, and Federico Capasso

OT2A.4 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Prototyping of Monolithic Diffractive-Refractive Micro-Optics with Inkjetable Polymers

J. Wolf, S. Gruetzner, M. Ferstl, J. J. Klein, A. Schleunitz, and G. Gruetzner

OT2A.5 Optical Fabrication and Testing (OF&T) 2019 View: PDF

3d Printed Glass Optics with Tailored Composition

R.J. Dylla-Spears, D.T. Nguyen, N. Dudukovic, T.D. Yee, K. Sasan, R. Ryerson, M.A. Johnson, O. Herrera, and L.A. Wong

OT2A.6 Optical Fabrication and Testing (OF&T) 2019 View: PDF

The Design and Build of a Zoom Telescope Utilizing Additive Manufacturing

Edward G. Winrow, Jeffery Hunt, and Victor H. Chavez

OT3A.1 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Design and Ultraprecision Diamond Machining of Beam Shaping Components for High-Power CO2 Lasers in Additive Manufacturing Applications

Jürgen Van Erps, Gebirie Y. Belay, Sijie Liao, Anje Van Vlierberghe, Piet Van den Ecker, Tom Craeghs, Hugo Thienpont, and Michael Vervaeke

OT3A.2 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Leveraging 3D Printing to Streamline Precision Optical Manufacturing

Ian Ferralli, Thomas Hordin, and Matthew Brunelle

OT3A.3 Optical Fabrication and Testing (OF&T) 2019 View: PDF

3D Printed Micro Lenses for Depth of Focus Imaging

Kelli C. Kiekens, David Vega, Jude Coompson, Hao Xin, and Jennifer K. Barton

OT3A.4 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Task-Specific Computational Refractive Element via Two-Photon Additive Manufacturing

Brian J. Redman, Amber L. Dagel, Bryan Kaehr, Charles F. LaCasse, Gabriel C. Birch, Tu-Thach Quach, and Meghan A. Galiardi

OT3A.5 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Analyzing and mitigating mid-spatial frequency errors

Sven R. Kiontke and Ulrike Fuchs

OW4A.1 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Fitting Surface Metrology Data: Is it Alignment, Radius, or Irregularity Error?

Paul E. Murphy, Chris Supranowitz, and Jacob Siegel

OW4A.2 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Alignment Errors vs. Measurability for Null-Measurements of Aspheres

Felix Lucas, Roland Schreiner, Thomas Waak, Kai Gäbel, and Lutz Reichmann

OW4A.3 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Active Optics for Space Telescopes

Nicholas Devaney

OW4A.4 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Improved FRFT-Based Method for Estimating Physical Parameters from Newton’s Rings

Zhen Guo, Ming-Feng Lu, Jin-Min Wu, Feng Zhang, and Ran Tao

OW4A.5 Optical Fabrication and Testing (OF&T) 2019 View: PDF

Super Sensitive Phase Measurement Deflectometry with effective fringe periods beyond the MTF limit

Luke A. DeMars, Ana Hiza Ramirez-Andrade, Rosario Porras-Aguilar, and Konstantinos Falaggis

OW4A.6 Optical Fabrication and Testing (OF&T) 2019 View: PDF